Our Blog

The words “overbite” and “overjet” certainly sound similar. Both conditions concern your front teeth. Both conditions fall under the same category of bite problems—Class II malocclusions, if you want to be technical. So it’s not surprising that they’re often used interchangeably. But while there are similarities, overbite and overjet are also distinctly different.

• Overbite/Overjet Geometry

In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.” With a Class II malocclusion, the upper front teeth project further beyond the lower teeth than they should.

Of course, teeth and bites are as individual as we are, so there are variations in just how and just how much the overlap occurs. In diagnosing an overbite vs. an overjet, the difference comes down to a matter of vertical vs. horizontal.

An overbite, or deep bite, occurs when the top teeth vertically overlap the bottom teeth more than they should for a healthy bite. Generally, when a person’s top teeth cover more than a quarter of the bottom teeth when biting down, or more than two to three millimeters, that person is said to have an overbite.

An overjet, commonly known as protruding or buck teeth, is the result of a horizontal overlap that is broader than normal. This causes the top teeth to project outward toward the lips more than they do in a typical bite. An overjet is usually diagnosed when the horizontal distance between the top and bottom teeth exceeds two to three millimeters.

• Overbite/Overjet Causes

The causes for both an overbite and an overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both. These bite problems can run in families. They are also affected by the size and position of the jaws and the shape and position of the teeth.

Early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to the development of a Class II malocclusion, particularly an overjet. Consistent pressure from thump or pacifier pushes the teeth outward as they erupt, which encourages them to protrude. These oral habits can affect the shape of the palate and jaw, too.

• Overbite/Overjet Treatments

There are many types of treatment available to correct teeth and bite misalignments. Dr. Tony Skanchy will tailor your treatment to your specific malocclusion for the best orthodontic outcome.

If you have a mild malocclusion, and minor dental issues are the main cause of that malocclusion, either braces or clear aligners can be effective for an overjet or an overbite. Elastics (rubber bands) are often used as part of this treatment.

If the malocclusion is due to bite problems caused by uneven upper and lower jaw development, devices called functional appliances can be used with braces to help guide the growth of the jawbones while young patients’ bones are still forming. These include appliances that work inside the mouth to help the upper and lower jaws grow proportionally, and external appliances such as headgear.

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself. Orthodontic treatment is usually needed as well both before and after surgery.

• Overbite/Overjet Consequences

Over time, a deep overbite can cause damaged gum tissue, worn enamel, and fractured teeth. When teeth protrude because of an overjet, they can lead to self-consciousness and are more at risk for injury. Both malocclusions share dental and medical consequences, including concerns about facial and jaw appearance, problems speaking or chewing, headaches, and face and jaw pain.

Class II malocclusions aren’t all the same, and orthodontic patients aren’t all the same either. You may have a minor malocclusion or a significant one. You may have an overbite, or an overjet, or a combination of different bite and alignment concerns. Your malocclusion may not bother you at all, or it may cause pain, discomfort, or self-consciousness.

That’s why every overbite or overjet should be evaluated by an orthodontist. When you visit our Sandy, UT orthodontic office, Dr. Tony Skanchy will be able to diagnose the exact nature of your malocclusion, the reason for it, and your best individualized treatment plan. An overbite and an overjet are different malocclusions, but you and your orthodontist want the same outcome for each: a healthy, attractive, and confident smile!

We’ll give it to you straight: it can be harder to keep your teeth their cleanest while you’re wearing braces. Food particles play hide-and-seek, plaque builds up around brackets, flossing is harder when you need to maneuver around wires. But keeping your teeth and gums healthy is even more important now that you’re wearing braces.

Why? Because when your braces come off, you want to enjoy the beautiful smile you’ve worked so hard for without worrying about discolored enamel, cavities, or swollen gums. Let’s look at some of the possible consequences when brushing and flossing are more challenging.

Decalcification

If you’ve noticed white spots around your brackets, you’re seeing the signs of decalcification, a common problem for those who wear braces.

Decalcification begins when plaque collects on the enamel around your brackets. The bacteria in plaque produce acids. These acids eat away at the minerals which keep your enamel strong, minerals like calcium and phosphorous. Places on the enamel where erosion takes place are left weakened and discolored.  Eventually, these weak spots can lead to . . .

Cavities

When plaque sticks around, whether near your brackets or anywhere on your teeth, it provides the perfect conditions for decay to develop. Left untreated, bacterial acids continue working away at decalcified spots in your enamel. This continuing erosion causes these surface spots to expand, grow deeper, and become cavities.

If you’re having trouble with built up plaque, and brushing isn’t doing the job for you, your dentist can remove it with a professional cleaning. Getting rid of plaque is healthy not only for your enamel, but your gums as well.

Gum disease

When plaque and tartar collect around the gumline, they irritate delicate gum tissue. This irritation causes gingivitis, or early gum disease. And, while young people rarely suffer from serious gum disease, the pain, redness, bleeding, swelling, and bad breath caused by gingivitis are not anyone’s life goals!

Brushing and flossing are essential to keeping your enamel and gums plaque-free. But even if you brush more often, it’s not as easy as it once was now that you have to work around and between brackets and wires. Luckily, there are lots of tools out there to help you get your teeth, gums, and braces their cleanest.

• Orthodontic toothbrushes

Special brushes designed just for braces can help you work around brackets and wires. V- or U-shaped bristle formations let you brush around and over your braces. Curved bristles can fit under wires. Smaller brush heads let you reach those hard-to-reach places.

• Electric toothbrushes

Many people find these brushes can clean more easily and effectively, especially when wearing braces. Tapered orthodontic brush heads are available, and, if you’re a heavy-handed brusher, there are models which alert you if you’re brushing too hard—protecting your braces and your enamel.

• Orthodontic floss

Special orthodontic flosses can help you do the tricky job of fitting floss behind your wires and between your teeth, or use a floss threader, which helps guide uncooperative floss into tight spaces.

• Water flossers

With their pulsing streams of water, water flossers can reach spots where regular brushes and flosses just can’t comfortably fit. There are even flossers available with special orthodontic tips.

Straight teeth are great. Straight and healthy teeth? Even better! You, Dr. Tony Skanchy, and our Sandy, UT orthodontic staff make a great team. Take advantage of our advice and tips for the best tools and techniques to make sure your smile is both perfectly aligned and perfectly healthy once those braces come off!

Even though it’s called a “permanent retainer,” your fixed retainer isn’t necessarily meant to last a lifetime. But with care, it should last just as long as you need it, keeping your teeth perfectly aligned after your orthodontic treatment is complete. Why is this retainer the one to choose for challenging alignments?

A fixed retainer is often used for teeth which were very crowded or had large gaps before treatment, especially along the bottom teeth, which tend to shift more. With a permanent retainer, a custom fitted wire is attached with a bonding adhesive to the back of each of the selected teeth. This design makes sure that the teeth can’t shift out of place while your bones and ligaments strengthen around them.

Occasionally, though, your permanent retainer isn’t quite as permanent as it should be. If you think your fixed retainer is becoming “unfixed,” what clues should you look for?

• Broken wire

A clearly broken wire can be obvious, or you might discover it when you notice pain or irritation caused by the end of a wire poking around your tongue or mouth.

• Loose bond

The orthodontic adhesive used to bond the wire to each tooth can come loose as the result of an accident, an unfortunately chewy treat, or simply with the passage of time.

• Shifting teeth

You might not notice anything wrong with your retainer, but what you do notice is that your once-straight teeth have started shifting back to their old positions. If you see any movement in your teeth, your retainer might need repair.

What should you do?

• Give our Sandy, UT orthodontic office a call! It’s important to act promptly to prevent further retainer damage, oral discomfort, and tooth misalignment.
• Rinse with warm water if your mouth is irritated.
• If a wire is poking you, call us for advice on gently pushing it back into place.
• Orthodontic wax can protect your teeth and tissue from detached wires.
• If you have a clear retainer, wear it until you can come in. If you don’t have one, and you can’t see us immediately, ask if an over the counter moldable retainer is a good idea to help keep your teeth aligned in the meantime.

One benefit of a fixed retainer is that it’s almost invisible because it’s behind your teeth. But this hidden location can also make it difficult to notice potential problems. Fortunately, there are some proactive steps you can take to help your permanent retainer—and your bite—stay healthy:

• Avoid foods which are sticky, hard, or chewy. If a food can damage traditional braces, it can damage your retainer.
• Wear protective gear like mouthguards and helmets when you’re active—they protect more than just your retainer!
• Ask your dentist to examine your retainer adhesive’s staying power whenever you have a checkup.

If you notice a detached wire or loose adhesive or see your teeth shifting, give Dr. Tony Skanchy a call. It’s important to act promptly to fix a fixed retainer, because your teeth and bite alignment are in jeopardy when you delay. And always bring your retainer (or retainer pieces) with you in case we can repair it.

Permanent retainers don’t necessarily last forever. But whether your fixed retainer is going to be with you long-term, or whether you’re going to transition to a removable retainer in the future, let’s make sure your permanent retainer is just as “permanent” as it needs to be!

When we think orthodontics, we commonly think teeth. Naturally! Straight teeth and a beaming smile are everyone’s orthodontic goal. But orthodontics is a field which specializes in more than misaligned teeth. While your beautifully aligned teeth are the visible outcome of your orthodontic work, a properly aligned bite is the foundation for your healthy smile.

A malocclusion occurs when the teeth and jaws aren’t properly aligned—they don’t fit together the way they should when the mouth is closed. A malocclusion, or bad bite, affects many people to some degree, but not always in exactly the same way. Some of the different types of malocclusion include:

• Crossbite

A crossbite occurs when upper teeth fit inside lower teeth. An anterior crossbite refers to the front teeth, with one or more upper front teeth, or incisors, fitting behind lower front teeth. A posterior crossbite affects the back teeth, with upper teeth fitting inside the lower teeth on one or both sides of the jaw.

• Crowding

When the jaw is small and/or the teeth are large, lack of space can result in crowded, twisted, or crooked teeth.

• Open bite

An anterior open bite means that the front teeth don’t close when biting down, leaving an open space between the upper and lower teeth. A posterior open bite occurs when the back teeth don’t make contact when the front teeth close.

• Overbite

Our upper front teeth naturally overlap the lower ones a small bit when the teeth are closed. An overbite occurs when the upper teeth significantly overlap the lower teeth.

• Overjet

When the upper front teeth protrude too far forward over the bottom teeth, it’s called an overjet, or, sometimes, buck teeth. Where an overbite causes a vertical overlap, an overjet takes into account the horizontal relationship of the teeth.

• Spacing

A jaw that is large, teeth that are small, missing teeth—these conditions can lead to gaps between the teeth.

• Underbite

An underbite results when the lower teeth and jaw extend further forward than the upper teeth and jaw, causing the bottom teeth to overlap the top teeth.

If you have a malocclusion, what comes next? This depends.

Some malocclusions are so minor that no treatment is necessary. Some are the result of misaligned teeth. Some occur because the upper and lower jaws are growing at different rates. Some are a combination of teeth and jaw misalignments. Some are caused by genetics, while others are caused by injuries or habits like prolonged thumb sucking or tongue thrusting.

Because malocclusions are so varied, your treatment plan will be designed for your specific needs. Braces, aligners, appliances like the Herbst® appliance or the palatal expander, surgery for severe malocclusions—there is a larger variety of treatment options than ever before to help you achieve a healthy bite.

When teeth and jaws don’t fit together as they should, the consequences can be damaged teeth and enamel, problems with the temporomandibular joint, headaches and facial pain, and difficulty chewing, eating, and speaking.

The good news is that early intervention for children can help correct teeth and jaw problems before they become more serious, leading to easier orthodontic care in the teen years, and helping to avoid the possibility of surgery or extractions. This is why Dr. Tony Skanchy and our team recommend an orthodontic assessment at our Sandy, UT office for children around the age of seven.

If you’re an adult with concerns about your teeth or bite, there’s good news for you, too. Dr. Tony Skanchy can devise a treatment plan to improve your bite and your smile no matter what your age.

Of course, despite our title, there’s really no such thing as a “common malocclusion” when we’re talking about your dental health. Each person—and each smile—is unique. Dr. Tony Skanchy will diagnose your malocclusion and create a personalized plan carefully tailored to your exact needs, for an uncommonly attractive, confident, and healthy smile.