Our Blog

Many of our patients at Alta View Orthodontics ask us about indirect bonding, a method of applying brackets for braces to the teeth in such a manner that an entire set of braces can be applied, including expanders, in less than an hour. Until now, braces were placed on each individual tooth, one at a time. The procedure required meticulous, long, painstaking sessions for both patient and doctor, to ensure each bracket was in the correct position, especially in the back of the mouth.

Indirect bonding process

Indirect bonding is a technique in which molds of the teeth are made, and most of the work for the braces is done in the lab. It is a remarkable process that depends on our ability to make particularly accurate models of your teeth. Much detail goes into the accurate measurement and alignment of the model, since your mouth is naturally unique to you.

The brackets for the braces are placed on the models of the teeth, exactly in the right place, fitted into the trays made on the model, and sealed and cured.

Setting the braces

When you come to our Sandy, UT office to have your braces fitted, the trays, made from your own teeth models, have been completed with the braces built into them. All that remains is a short sitting to fit the trays onto your teeth, align them, and separate the braces from the trays.

Your own teeth will have to undergo some preparatory work in order to accept the braces. This involves preparing the surface of the teeth for the adhesive for the braces, as well as preparing the surfaces of any crowns. You will also have a short period to wait while the adhesive cures, once the braces are in place.

All the other work that would traditionally have been done in the orthodontist’s chair has been done on the models, and by the time the orthodontist sees you for the second sitting, your braces are exactly aligned to your teeth, set in place, and the wires placed.

Adjustments to your braces

You will be seen approximately every six to 14 weeks. When needed, adjustments will be made to the wires that run through the braces. In this way, indirect bonded braces are very much like traditional braces. You’ll also need to follow a diet free of sticky, chewy, or crunchy foods, because they can damage your braces. If you have any questions about the potential for indirect bonding for your braces, please give us a call at our convenient Sandy, UT office or ask Dr. Tony Skanchy during your next visit!

A lot of our patients, (especially you parents!) come to Alta View Orthodontics convinced that traditional braces are the only answer to straight teeth. We are proud to offer Damon Smile in our Sandy, UT office, which can give you better results in less time than traditional orthodontic treatment! Damon Smile braces also allow your teeth to move more comfortably and easily than traditional braces. With  Damon Smile, achieving that perfect smile will be faster and easier than you ever thought possible.

Some questions we will go over at your initial consultation include:

Are you right for Damon Smile?

Our team at Alta View Orthodontics will evaluate your eligibility for treatment with Damon Smile, and the procedure can be performed for kids and adults alike!

What makes Damon braces better?

Probably the biggest advantage of Damon braces over traditional brackets is the amount of time and effort involved. We can often cut months off of the total treatment time for patients using Damon Smile, and less visits to our office are necessary to make adjustments.

In addition, the Damon Smile brackets are cleaner and do not use the elastic traditional brackets do. They are also less prone to plaque buildup. In addition, Damon braces are smaller and have fewer parts than traditional brackets, making them less noticeable and more comfortable. With Damon Smile, you will not experience any tightening, unlike with traditional braces. Dr. Tony Skanchy can position your teeth and avoid frequent adjustments, which also reduces the need for complicated tooth extractions or surgery.

If you have been thinking about obtaining a dazzling smile, please give us a call at Alta View Orthodontics for an initial consultation to see if Damon Smile is right for you!

Did you know that even in ancient times, people wanted to improve the look and function of their smiles? Alta View Orthodontics thinks of modern orthodontic appliances as sleek, efficient technology, but this was not always so! Take a look at the highlights in the evolution of braces.

Ancient Times: From Greece to Rome

• According to The Angle Orthodontist, Aristotle and Hippocrates first thought about methods for straightening teeth between 400 and 300 BC.
• The Etruscans, in what we now know as Italy, buried their dead with appliances that maintained spaces and prevented collapse of their teeth and jaws during life. Archaeologists have discovered mummified remains in various locations that have metal bands wrapped around the teeth.
• A Roman tomb has also been discovered in which the teeth were bound with gold wire, including documentation on the wire’s use as a dental device.

18th Century: A French Development

• The French dentist Pierre Fauchard is acknowledged as the father of modern dentistry. In 1728 he published a book that described various methods for straightening teeth. Fauchard also used a device known as a “blandeau” to widen the upper palate.
• Louis Bourdet was another French dentist who published a book in 1754 that discussed tooth alignment. Bourdet further refined the blandeau and was the first dentist to extract bicuspids, or the premolar teeth between canines and molars, for the purpose of reducing tooth crowding.

19th Century: Orthodontics Defined

• Orthodontics started to become a separate dental specialty during the early 19th century. The first wire crib was used in 1819, marking the beginning of modern orthodontics.
• During this period, gold, platinum, silver, steel, gum rubber, vulcanite, and occasionally wood, ivory, zinc, and copper were used — as was brass in the form of loops, hooks, spurs, and ligatures.
• Edward Maynard first used gum elastics in 1843 and E. J. Tucker began making rubber bands for braces in 1850.
• Norman W. Kingsley published the first paper on modern orthodontics in 1858 and J. N. Farrar was the first dentist to recommend the use of force over timed intervals to straighten teeth.

20th Century: New Materials Abound

• Edward Angle developed the first classification systems for malocclusions (misaligned teeth) during the early 20th century in the United States, and it is still in use today. Angle founded the American Society of Orthodontia in 1901, which was renamed the American Association of Orthodontists in the 1930s.
• By the 1960s, gold was universally abandoned in favor of stainless steel.
• Lingual braces were the “invisible” braces of choice until the early 1980s, when tooth-colored aesthetic brackets made from single-crystal sapphire and ceramics became popular

Today

As we arrive in the present, you need only look at your own braces to see how far we’ve come. Your treatment plan was probably created with a 3D digital model, and we’ve likely used a computerized process to customize your archwires. Perhaps you have clear aligners, self-ligating brackets, or highly resilient ceramic brackets with heat-activated wires.

Orthodontics has come a long way from the days of Aristotle, and even the bulky wrap-around braces of just 60 years ago. Regardless of your specific treatment plan, the development of high-tech materials and methods has made it possible for your orthodontic experience to be as effective, efficient, and comfortable as possible. Call our office in Sandy, UT to schedule your first orthodontic consultation!

Straighter teeth is something many people desire. A nice smile is one of the most attractive things about a person. However, wearing a mouth full of braces for two, three, or more years can be a major pain, both literally and figuratively.

Luckily, there is another option. Invisalign is an alternative to traditional braces. Learn more about the benefits Invisalign offers and why you should consider this exciting method of straightening teeth.

• When you have straight teeth, your mouth is healthier in general and there is less chance of tooth decay and gum disease. Invisalign makes it possible for more people to straighten their teeth.
• Invisalign is essentially invisible. You can straighten your teeth without unsightly metal in your mouth.
• The average cost is similar to that of traditional braces, which makes it affordable for many families.
• With Invisalign, the aligner trays are smooth and comfortable to wear. Traditional metal braces can be uncomfortable and cause irritation to the mouth.
• Invisalign is removable, so you do not have to wear the system during special occasions, or when you’re eating. With normal metal braces, you are stuck with them for the entire straightening process.
• Brushing and flossing are simple. Since the system is removable, you can brush and floss just like normal.

As you can see, Invisalign is an exciting option we provide at Alta View Orthodontics for those who want straighter teeth. If this is something that sounds interesting to you, talk to Dr. Tony Skanchy and find out if it would work for your particular situation. Get started today, and before you know it you will be enjoying your straighter teeth.

For more information about Invisalign, or to schedule an initial consultation with Dr. Tony Skanchy, please give us a call at our convenient Sandy, UT office today!